Alfawise U20 Mix is a high-end desktop 3D Printer with 300mm x 300mm x 400mm print volume, a large 4.3-inch color touch screen, a dual extruder with a fast response automatic, And a self-leveling filament. This 3D printer comes with different built-in functions which include Power failure Auto Resume, Filament Run Out Detection, Offline Printing with the help of the SD card, USB, And Wi-Fi connection.
Where to Buy Alfawise U2 Mix 3D Printer
Alfawise U2 Mix 3D Printer Key Features
- Synchronized Dual Z Axis System
- Dual-colour Printing
- 4.3-inch Color Touchscreen
- Large Print Size: 300mm x 300mm x 400mm
- Max Print Speed: 150mm/s
- TMC2208 mute chip
- Detachable Rapid Heating AC heatbed
- Power Outrage Protection And Recovery
- Filament Runout Detection And Recovery
- Automatic Shutdown After Print
- 95% pre-assembled, easy For installation
- High accuracy printing quality, down to 50 microns
The printer has 3 steps instant fast assembly structure which makes it easy to put together beFore use.
Furthermore, the Alfawise U20 Mix adopts the design of dual extruder single nozzle, which Can print single-color or dual-color models. The double Z-axis design strengthens the firmness of the machine And ensures the stability of printing.
This printer also comes with a magnetic removable print head which is modularized, thus making it assemble or disable.
Above all, the Alfawise U20 Mix 3D Printer frame has an attached 4.3-inch color touchscreen with a clickable control wheel.
Build And Print Volume
Automatic Shutdown After A Print
The Alfawise U20 Mix 3D Printer also comes with a built-in feature that allows it to detect when a printing project is completed, so it Can automatically cut off the power supply to save electricity.
This smart power Management technology enables the printer to turn off automatically when no operation is made. Smart power Management also protects your printer from safety hazards, such as overtemperature, useless print, And accidental fire, which will reduce electricity use And costs.
Filament Runout Detection
The Alfawise U20 Mix also comes with a sensor that allows you to avoid repeating a full print from running out of filament during the printing process. It automatically sent notification to you once the filament material is low And once replaced it resume printing from where it stopped without repeating print.
Power Outage Detection
Furthermore, the printer also comes with a power failure or outrage sensor which automatically detect a failure in power supply And record the coordinate point And resume printing after power recovery.
Above all, this printer has an App that should be downloaded on the user’s smartphone to receive notification of printing from Wechat/ Facebook Messenger. Also when printing is finished, Alfawise U20 Mix will push a message to your smartphone.
This 3D printer comes with the MK8 extruder parts that together hAndle the moving And processing of plastic filament. It pushes And pulls filament through a long tube And into the hot end. The extruder is mounted on the printer’s frame directly above the hot-end nozzle insures.
The ultra-quiet two-phase stepper motor drive chip provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies. It Can replace the original TMC2100, lower heat, especially For the 3D printing market.
Automatic Leveling Technology
Alfawise U20 Mix also adopts a smart sensor technology, allowing accurate calibrations And easy set-up. The Automatic Leveling sensor helps get rid of a plethora of common 3D printing problems, including clogging, scratch marks on your print, or general poor adhesion because the first layer is uneven. This sensor guarantees the stability And safety of printing.
The sensor measures the distance between the printing bed And the nozzle at different locations then the printer uses this inFormation via its firmware to adjust the nozzle as it moves across the print platForm. The adjustment is determined after the printer has calculated the orientation of your print platForm with respect to your nozzle’s movement on the XY axis.
Furthermore, this sensor helps reduce the sound of operation to as low as 60DB.
Touch Screen Control
There is an icon HELP at the upper right corner of the screen. You could understAnd the functions of each interface by tapping on the icon. The user experience is highly enhanced.
In addition, Alfawise U20 Mix has a previewing mode which makes it easier For you to store multiple models And find the model needed For printing. You Can then select the file, then, preview the model. After confirming the model, you Can start your printing process immediately.
Rapid Heating AC Heatbed
Alfawise U20 Mix comes with A.C. powered heat-bed, instead of the regular D.C. power, thus, supplying enough heat to operate the printer much faster.
Troubleshooting Guide And FAQ Help You Maintain the Equipment
Above all, this printer comes with a Troubleshooting Guide to check the operation of motors And limit switches of X/Y/Z axis. It’s easier For you to maintain the printer with the function FAQ. You should keep the machine in good condition by checking And repairing it regularly.
In addition, after turning on the printer, a power-on self-test is perFormed immediately. This test will detect the thermal perForMance of nozzle And platForm, And the overall operation of X,Y,Z axis. This function Can be Manually turned on And off in the interface.
Alfawise U20 Mix 3D Printer Price And Availability
Alfawise U20 Mix 3D Printer Specs
Here are a few specs of the Alfawise U20 Mix 3D Printer:
- Type: FDM 3D Printer
- Frame: Aluminum Extrusion
- Screen: 4.3-inch color touchscreen
- Print Resolution: Dual Z-Axis (100 microns)
- Maximum Print Speed: 150 mm/s
- Printing Filament: ABS, PLA, TPU, PETG And Flexible Materials
- Maximum Travel Speed: 250 mm/s
- Build Volume: 300mm x 300mm x 400mm
- Extruder Type: Dual Extruder
- Nozzle Temperature: up to 250C
- Dimension: 23.15 x 19.21 x 23.94 inches
- Weight: 9.5 kg
- Control Board: MSK Gen L
- Nozzle Type: VolCano
- Filament Diameter: 1.75mm
- Nozzle Diameter: 0.4mm
- Host computer software: Cura, Repetier-Host, Simplify3D
- XY-axis Positioning Accuracy: 0.0125mm
- Z-axis Positioning Accuracy: 0.0025mm
- Connectivity: USB, SD Card, Wi-Fi
- Power Requirement: 24V
- Voltage: 110-240V
More on Printers
- Top Printer Problems
- Creality Ender 6
- Fulcrum Minibot 1.0
- Buying Printer
- Compare Prices of Printers and Scanners
- HP Printer Prices
- Buying 3D Printers
- Laptop Prices in Nigeria
The post Alfawise U20 Mix 3D Printer Price, Specs, and Best Deals appeared first on Nigeria Technology Guide.
84 total views, 2 views today